datesnanax.blogg.se

1. HP MEDIASMART SERVER EX470 EX475 DRIVERS FROM ANOTHER
2. HP MEDIASMART SERVER EX470 EX475 SOFTWARE IN THE
3. HP MEDIASMART SERVER EX470 EX475 DRIVER ISSUE HAS

Hp Mediasmart Server Ex470 Ex475 Software In The

No way to find a copy of the original software in the web to use the device.Buy Memory RAM Upgrades for your HP - Compaq Server MediaSmart EX470 / EX475 - 100 Compatibility Guaranteed. I added it manually to my devices. I installed 'HP Support Assistant' but this tool doesn't detect my device in the network. Anyone has an idea where I can get it. I need software for HP EX475 MediaSmart Server. Product: HP EX475 MediaSmart Server.

This review should apply equally to the EX470 as the only difference between the two models is the amount of 500gb hard disk installed in the factory one for the EX470 and two for the EX475. At the heart of the EX475 server is a 1.8GHz AMD Sempron 3400 processor and 512mb of RAM. Unfortunately this is not an option so its not suitable for headless use without re-inventing the wheel.Reset to V1. It works very well and were I prepared to keep the machine attached to a Keyboard, Mouse and Monitor it would do the job superbly.

While it is a fact that the MediaSmart hardware is somewhat 'underpowered', performance is surpisingly confortable for doing the dayto day job of serving files, backing up and. FYI: I have been running WHS 2011 on this system since the VAIL beta version. Over the last week I have installed successfully on a USB ScanDisk with SWAP, Without Swap, and on the RAID5 virtual Disk.Yes: WHS 2011 RTM version will run on the original HP MediaSmart EX470 with 2GB RAM upgrade. HP MediaSmart EX497 EX495 EX490 EX487 EX485 EX480 EX475 & EX470.

Hp Mediasmart Server Ex470 Ex475 Driver Issue Has

Hp Mediasmart Server Ex470 Ex475 Drivers From Another

The normal OMV installer doesn't give you a choice and installs itself on the entire disk.Basically, you should remove your data drives, install only the system drive, and run the installer from a USB drive. I don't understand your process about Swap or not Swap. There is an option to load drivers from another media and asks for an ISO build at some tries but as I don't know the core nor have the drivers or a means of dropping to root shell to get them so i'm stuck.Once again however when I finally get to the re-boot point to run it I am blind so i'm assuming same driver issues.I'm not surprised V3 failed completely as I doubt its all there but this presumed SIS driver issue has me stumped as I would have expected TXT console to be visible.I even tried two different monitors in case it was a matter of out of range signals.I don't want to give up on this, i'm happy to admit I'm not capable of anything other than following learned instructions on configuring Linux as I don't code in this environment.As I cant simply use the built in installer script and even manual steps work fine eventually but I still don't get a good result, I need learned input to get to the bottom of this issue.If I have to i'll build my own collection of services on Ubuntu Server to get a manageable result but i'd far rather use OMV.NB Puppy linux, installed on a USB boots up fine though I do need to manually get the SIS fix as the default screen is flakey without it.A Ubuntu live CD is unusable as it also cant drive the screen appropriately so I get nothing readable - just out of sync colourful crap.I'm not sure what you're doing here. Installer failes quickly at the Debian package stage but did proceed to build everything with re-trying after that.Had to choose all repositories for downloading services before I could proceed to the end point. Being restrained by the install script on this PC is tricky.All this done successfully, the PROBLEM IS.Post every install on V2 when it comes to starting up there is no video output past BIOS, not even console showing so I have no idea to what stage it progresses as its not registering a DHCP lease.I can smoothly shut it down via power button and it does sound to power up fine without error codes or lights, Its just not accessible.I don't know how this Debian build varies from the Ubuntu server but I suspect the SIS VGA libraries are not available nor possibly the networking after install.Tried installing this today onto the RAID5 volume to see if it made any difference. Finding the Server The Windows Home Server Connector installations looks for your HP MediaSmart.Whereas it takes a couple of sessions to get the RAID5 virtual volume built 1st in order to choose it to install on it, it does work.Having got the initial build to install successfully directly on USB, I re-built again without swap on USB to see if it still worked with the intention of moving /var and /tmp onto the RAID5The installs can be fiddly and most often I have to go back to re-try previous stages 'post disk volume' as they often fail.

Go straight for OMV3.Black screen and not appearing on the network suggests a crash during the boot, but once OMV is installed, you no longer need the screen.Another option is to install a plain Debian and install OMV on top. You can drop OMV2 as it will no longer be supported. If you run the system from a flash drive, you need to install and run the flashmemory plugin.You certainly shouldn't be installing multiple times. It requires a separate drive (or USB flash device) for the system. You should not install OMV on your RAID5 drives.

The VGA issue has nothing to do with the drive the system is installed on. Just install as normal on your USB flash drive (but really, you should consider using a cheap SSD instead) and install the flash memory plugin later.You shouldn't be messing around with the RAID drives at this stage, not until you have the OMV web UI up and running. Don't bother with repartitioning.

The only thing holding it back is that some plugins are still considered beta. You shouldn't need VGA display at all.V3 is stable at this stage.